Join CMAEP founder and director, Scott Parady, for a salt firing workshop focused on the use of flashing slips and glazes and their interaction with sodium chloride in the kiln atmosphere. Participants will explore how different clay bodies, slips, and a variety of glazes respond to light - medium reduction, the salt environment and how these variables influence surface development.
Schedule:
Thursday, August 13:
8 - 9am: Arrive
9am: Meeting. Glaze demonstrations and kiln talk with Scott. Loading to follow.
Friday, August 14:
8 am - 8 pm (possibly later): Firing.
6:30pm: Woodfired pizza potluck.
Saturday, August 15: Handbuilding plates workshop held at CMAEP with Casey Beck. Register for the workshop HERE.
Sunday, August 16, 10am: Unload kiln, debriefing, cleaning.
Included in this workshop:
In depth instruction from Scott on the process of preparing for a salt firing, loading the kiln, firing the kiln, unloading, and cleaning.
Access to our glazes, slips, and wadding.
2 cubic feet of work in the kiln.
Free camping through the duration of the firing and during unloading is included with registration, see the shop tab to purchase additional camping nights. When camping, you have access to a hot shower and bathroom.
24/7 access to a fridge, microwave and electric kettle.
Experience: No prior kiln firing experience is required for this course.
Participation:
Participants may come and go during the firing if desired. Please note this is not a pick-up and drop-off firing service and participants are expected to assist with prep, loading, a majority of the firing, unloading and clean-up.
Clay Bodies:
Much of the outcome in atmospheric firings depends on the clay body. It is important to use clays which are highly refractory. All clay bodies must be Cone 10 or higher. No low-fire or mid-range clay as they will melt in the kiln and make a HUGE mess of everyone’s work and our kilns. Suggested commercial clays we have had success with are WSO, Porcelains, B-mix Woodfire, White stoneware.
Scott recommends smoother (less groggy) clay bodies for this workshop.
What to make:
A variety of shapes and sizes is strongly encouraged, this will make for better load and firing results! Please avoid bringing ONLY cups and bowls, appropriate spaces for these forms are limited and if you do so some of your work will likely not make it into the kiln. A percentage of your work will be placed in areas in or near the coal beds and stoking areas. Steer clear from plates and platters as these tend to be hard to fit and often warp in firing. Tall and thin, always in, and round and bulbous shapes are great for certain spots.
How much work to bring:
This workshop includes two cubic feet of work in the kiln. You may bring a few extra pieces as there can occasionally be extra space available.
To get an idea of how much work to bring, you may measure out a space and measure your work before leaving. Example: measure out a space that is 24” x 12” and stack work within that space to be on average 6” tall - this will equal about 1 cubic foot. When measuring the cubic space of an object we also take into account the amount of space that is needed around an object and the wadding that lifts the piece higher and off of the shelf by about ¼” - 2”.
Please only bring bisque fired work
What to bring: Closed toe shoes, cotton clothing, work gloves, eye protection, respirator or mask, hearing protection (optional).
Handbook:
If you are looking for additional information on the workshop, please read through our soda / salt firing handbook. This will also be sent to you prior to the workshop beginning.
Workshop Cancellation & Refund Policy:
In the event of cancellation by the registrant up to 45 days prior to the date of the event you will receive a refund of your purchase amount minus a $100 administrative fee, or $50 administrative fee to transfer into another available workshop. No refund will be given within 45 days of the workshop.
Waitlist:
Send us an email if you would like to be added to the waitlist.
Join CMAEP founder and director, Scott Parady, for a salt firing workshop focused on the use of flashing slips and glazes and their interaction with sodium chloride in the kiln atmosphere. Participants will explore how different clay bodies, slips, and a variety of glazes respond to light - medium reduction, the salt environment and how these variables influence surface development.
Schedule:
Thursday, August 13:
8 - 9am: Arrive
9am: Meeting. Glaze demonstrations and kiln talk with Scott. Loading to follow.
Friday, August 14:
8 am - 8 pm (possibly later): Firing.
6:30pm: Woodfired pizza potluck.
Saturday, August 15: Handbuilding plates workshop held at CMAEP with Casey Beck. Register for the workshop HERE.
Sunday, August 16, 10am: Unload kiln, debriefing, cleaning.
Included in this workshop:
In depth instruction from Scott on the process of preparing for a salt firing, loading the kiln, firing the kiln, unloading, and cleaning.
Access to our glazes, slips, and wadding.
2 cubic feet of work in the kiln.
Free camping through the duration of the firing and during unloading is included with registration, see the shop tab to purchase additional camping nights. When camping, you have access to a hot shower and bathroom.
24/7 access to a fridge, microwave and electric kettle.
Experience: No prior kiln firing experience is required for this course.
Participation:
Participants may come and go during the firing if desired. Please note this is not a pick-up and drop-off firing service and participants are expected to assist with prep, loading, a majority of the firing, unloading and clean-up.
Clay Bodies:
Much of the outcome in atmospheric firings depends on the clay body. It is important to use clays which are highly refractory. All clay bodies must be Cone 10 or higher. No low-fire or mid-range clay as they will melt in the kiln and make a HUGE mess of everyone’s work and our kilns. Suggested commercial clays we have had success with are WSO, Porcelains, B-mix Woodfire, White stoneware.
Scott recommends smoother (less groggy) clay bodies for this workshop.
What to make:
A variety of shapes and sizes is strongly encouraged, this will make for better load and firing results! Please avoid bringing ONLY cups and bowls, appropriate spaces for these forms are limited and if you do so some of your work will likely not make it into the kiln. A percentage of your work will be placed in areas in or near the coal beds and stoking areas. Steer clear from plates and platters as these tend to be hard to fit and often warp in firing. Tall and thin, always in, and round and bulbous shapes are great for certain spots.
How much work to bring:
This workshop includes two cubic feet of work in the kiln. You may bring a few extra pieces as there can occasionally be extra space available.
To get an idea of how much work to bring, you may measure out a space and measure your work before leaving. Example: measure out a space that is 24” x 12” and stack work within that space to be on average 6” tall - this will equal about 1 cubic foot. When measuring the cubic space of an object we also take into account the amount of space that is needed around an object and the wadding that lifts the piece higher and off of the shelf by about ¼” - 2”.
Please only bring bisque fired work
What to bring: Closed toe shoes, cotton clothing, work gloves, eye protection, respirator or mask, hearing protection (optional).
Handbook:
If you are looking for additional information on the workshop, please read through our soda / salt firing handbook. This will also be sent to you prior to the workshop beginning.
Workshop Cancellation & Refund Policy:
In the event of cancellation by the registrant up to 45 days prior to the date of the event you will receive a refund of your purchase amount minus a $100 administrative fee, or $50 administrative fee to transfer into another available workshop. No refund will be given within 45 days of the workshop.
Waitlist:
Send us an email if you would like to be added to the waitlist.
